Tier 4 Systematic

WEST TROY TOOL & MACHINE, INC.

📍 155 MARYBILL DRIVE SOUTH, TROY, OH 45373🏭 Forging and Stamping (NAICS 332116)📅 2011-05-17
$19,600.00
Total Penalties
19
Citations
22/100
Risk Score
383
Analysis Words
Enforcement Analysis

According to U.S. Department of Labor enforcement records, WEST TROY TOOL & MACHINE, INC. — a forging and stamping facility located at 155 MARYBILL DRIVE SOUTH, TROY, OH 45373 — was the subject of a formal OSHA inspection that resulted in 19 citation(s) and cumulative proposed penalties of $19,600.00. The inspection case was opened on 2011-05-17.

The volume of citations issued during this inspection suggests systematic compliance deficiencies rather than isolated incidents. Facilities with 10 or more citations typically face comprehensive abatement requirements and may be subject to follow-up inspections.

BLS Injury Data: According to the Bureau of Labor Statistics (2022), this industry sector has an occupational injury rate of 3.3 per 100 full-time workers — 22% above the national average of 2.7. The sector fatality rate is 2.3 per 100,000 workers.

Industry Benchmark: The total penalty of $19,600.00 is more than 3.0× the national average of $6,436.62 for facilities in the Manufacturing sector (NAICS 332116). This sector encompasses 82,943 inspected facilities nationwide with aggregate penalties totaling $533.9M.

State Context: Within OH, this facility's penalty places it at the 97th percentile among 91,405 inspected facilities. The statewide average penalty is $3,818.37.

Citation Analysis: The inspection produced 19 citations spanning 3 distinct OSHA regulatory standards. The citation breakdown includes: 15 serious — A workplace hazard that could cause death or serious physical harm exists, and the employer knew or should have known about the condition.

Enforcement Timeline: Citations were issued beginning July 8, 2011 with the latest abatement deadline set for August 3, 2011. Of the 19 total citations, 10 (53%) have been marked as abated in DOL records, suggesting partial progress toward required corrective actions.

Penalty Assessment: The cumulative penalty of $19,600.00 reflects OSHA's gravity-based penalty calculation methodology, which considers the severity of potential injury, the probability of occurrence, the employer's size, good faith, and violation history. The per-citation average of $1,031.58 falls within the standard penalty range.

The enforcement profile for West Troy Tool & Machine, Inc. reveals a systemic and alarming breakdown in

Industry Benchmark (OH)

This facility's $19,600 penalty is higher than 79% of all penalized companies in the NAICS 332116 industry in OH. The state average penalty for this industry is $18,814.

$18,814
State Avg
$19,600
This Facility
Citation Matrix — 19 Citations
29 CFR 1910.217(b)(07)
Mechanical Power Presses
Serious
Penalty: $2,450.00Gravity: 01Issued: July 8, 2011Abated: ✓ Yes
29 CFR 1910.217(b)(09)
Mechanical Power Presses
Serious
Penalty: $0.00Gravity: 01Issued: July 8, 2011Abated: ✓ Yes
29 CFR 1910.217(b)(09)
Mechanical Power Presses
Serious
Penalty: $0.00Gravity: 10Issued: July 8, 2011Abated: Pending
29 CFR 1910.217(c)(01)
Mechanical Power Presses
Serious
Penalty: $0.00Gravity: 10Issued: July 8, 2011Abated: Pending
29 CFR 1910.217(c)(03)
Mechanical Power Presses
Serious
Penalty: $2,450.00Gravity: 10Issued: July 8, 2011Abated: ✓ Yes
29 CFR 1910.217(d)(01)
Mechanical Power Presses
Serious
Penalty: $0.00Gravity: 01Issued: July 8, 2011Abated: ✓ Yes
29 CFR 1910.217(c)(02)
Mechanical Power Presses
Serious
Penalty: $2,450.00Gravity: 10Issued: July 8, 2011Abated: ✓ Yes
29 CFR 1910.217(d)(01)
Mechanical Power Presses
Serious
Penalty: $0.00Gravity: 10Issued: July 8, 2011Abated: Pending
29 CFR 1910.217(e)(01)
Mechanical Power Presses
Serious
Penalty: $2,450.00Gravity: 10Issued: July 8, 2011Abated: ✓ Yes
29 CFR 1910.217(e)(01)
Mechanical Power Presses
Serious
Penalty: $0.00Gravity: 10Issued: July 8, 2011Abated: ✓ Yes
29 CFR 1910.217(b)(07)
Mechanical Power Presses
Serious
Penalty: $0.00Gravity: 10Issued: July 8, 2011Abated: Pending
29 CFR 1910.147(d)(03)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $0.00Gravity: 10Issued: July 8, 2011Abated: Pending
29 CFR 1910.212(a)(01)
Machine Guarding — General Requirements
Serious
Penalty: $2,450.00Gravity: 05Issued: July 8, 2011Abated: ✓ Yes
29 CFR 1910.217(b)(07)
Mechanical Power Presses
Serious
Penalty: $2,450.00Gravity: 10Issued: July 8, 2011Abated: ✓ Yes
29 CFR 1910.217(c)(05)
Mechanical Power Presses
Serious
Penalty: $0.00Gravity: 10Issued: July 8, 2011Abated: ✓ Yes
This report is compiled from publicly available U.S. Department of Labor enforcement data under the Freedom of Information Act. SVEP Navigator is an independent research and analysis platform and is not affiliated with, endorsed by, or connected to OSHA, the Department of Labor, or any federal agency. Information is provided for research, educational, and compliance planning purposes only and does not constitute legal advice. Penalty amounts shown are proposed penalties and may have been modified through contest proceedings or settlement.
Local Competitor Benchmark

Comparing penalized facilities in TROY, OH (Broader Sector)

WEST TROY TOOL & MACHINE, INC. (This Facility)
$19.6K
19 cit.
WEST TROY, LLC
$31.5K
8 cit.
HOBART CABINET COMPANY
$20.0K
18 cit.
F&P AMERICA MFG., INC.
$18.5K
14 cit.
More OH Enforcement Records
SHELL CHEMICAL COMPANY - DIV OF SHELL OIL COMPANY
BELPRE, OH
$3.0M
64 cit.
BP PRODUCTS NORTH AMERICA INC.
OREGON, OH
$2.4M
39 cit.
AK STEEL CORPORATION
MIDDLETOWN, OH
$2.3M
149 cit.
GREAT LAKES TANK & VESSEL LLC
CLEVELAND, OH
$1.6M
46 cit.
MANGANAS PAINTING CO., INC.
LEBANON, OH
$1.1M
61 cit.
Other Inspected Facilities in TROY, OH
TUBE PRODUCTS, INC.
$812.3K
45 cit.
AMERICAN MATSUSHITA ELECTRONICS CORPORATION
$218.9K
88 cit.
TAMPA ENTERPRISES INC. D/B/A EUROPEAN CRAFT CONSTR
$60.0K
11 cit.
ADCARE HEALTH SYSTEMS,INC. DBA KOESTER PAVILION
$44.4K
28 cit.
WEST TROY, LLC
$31.5K
8 cit.
Related Guides & Tools
OSHA Fines & Penalties Guide →
How OSHA calculates penalties and maximum fine amounts.
After an OSHA Inspection →
Citations, appeals, and penalty negotiation steps.
Top 10 OSHA Violations →
The most frequently cited standards nationwide.
Manufacturing Safety Data →
Industry-wide violation stats and rankings.

Explore more: OSHA enforcement in TROY · Ohio data · Search the database · Incident Rate Calculator

Frequently Asked Questions
What OSHA violations was WEST TROY TOOL & MACHINE, INC. cited for?

WEST TROY TOOL & MACHINE, INC. received 19 citation(s) covering 3 distinct OSHA standards. Total proposed penalties were $19,600.00. The inspection opened on 2011-05-17.

How much was WEST TROY TOOL & MACHINE, INC. fined by OSHA?

OSHA proposed penalties of $19,600.00 against WEST TROY TOOL & MACHINE, INC. in TROY, OH. Average per citation: $1,031.58.

Is WEST TROY TOOL & MACHINE, INC. a safe workplace?

Based on enforcement records, WEST TROY TOOL & MACHINE, INC. has a risk score of 22 out of 100. The volume of citations issued during this inspection suggests systematic compliance deficiencies rather than isolated incidents. Facilities with 10 or more citations typically face comprehensive abatement requirements and may be subject to follow-up inspections.

How does this penalty compare to the industry average?

The average penalty for Forging and Stamping facilities is $6,436.62. This facility penalty of $19,600.00 is above the industry average.