Tier 4 Systematic

YALE SECURITY INC. DBA NORTON DOOR CONTROLS

📍 3000 E HIGHWAY 74, MONROE, NC 28112🏭 Hardware Manufacturing (NAICS 332510)📅 2006-11-08
$7,350.00
Total Penalties
11
Citations
16/100
Risk Score
416
Analysis Words
Enforcement Analysis

According to U.S. Department of Labor enforcement records, YALE SECURITY INC. DBA NORTON DOOR CONTROLS — a hardware manufacturing facility located at 3000 E HIGHWAY 74, MONROE, NC 28112 — was the subject of a formal OSHA inspection that resulted in 11 citation(s) and cumulative proposed penalties of $7,350.00. The inspection case was opened on 2006-11-08.

The volume of citations issued during this inspection suggests systematic compliance deficiencies rather than isolated incidents. Facilities with 10 or more citations typically face comprehensive abatement requirements and may be subject to follow-up inspections.

BLS Injury Data: According to the Bureau of Labor Statistics (2022), this industry sector has an occupational injury rate of 3.3 per 100 full-time workers — 22% above the national average of 2.7. The sector fatality rate is 2.3 per 100,000 workers.

EPA Environmental Record: The EPA shows no current violations for this facility. EPA penalties total $4,741.00 (Clean Air Act: $4,741.00). Toxic Release Inventory reports 20030 lbs in releases/transfers. Source: EPA ECHO database.

Industry Benchmark: The total penalty of $7,350.00 is approximately in line with the national average of $6,436.62 for facilities in the Manufacturing sector (NAICS 332510). This sector encompasses 82,943 inspected facilities nationwide with aggregate penalties totaling $533.9M.

State Context: Within NC, this facility's penalty places it at the 96th percentile among 88,256 inspected facilities. The statewide average penalty is $1,699.39.

Citation Analysis: The inspection produced 11 citations spanning 6 distinct OSHA regulatory standards. The citation breakdown includes: 9 serious — A workplace hazard that could cause death or serious physical harm exists, and the employer knew or should have known about the condition. 2 other-than-serious — The violation has a direct relationship to job safety and health but is unlikely to cause death or serious physical harm.

Enforcement Timeline: Citations were issued beginning January 25, 2007 with the latest abatement deadline set for May 26, 2009. Of the 11 total citations, 10 (91%) have been marked as abated in DOL records, indicating substantial compliance with corrective action requirements.

Penalty Assessment: The total proposed penalty of $7,350.00 falls within OSHA's standard enforcement range and may have been adjusted through informal settlement conference procedures, penalty reduction factors, or good faith credit for demonstrated safety and health management systems.

Industry Benchmark (NC)

This facility's $7,350 penalty is higher than 75% of all penalized companies in the NAICS 332510 industry in NC. The state average penalty for this industry is $4,655.

$4,655
State Avg
$7,350
This Facility
Citation Matrix — 11 Citations
29 CFR 1910.147(c)(05)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $0.00Gravity: nanIssued: January 25, 2007Abated: ✓ Yes
29 CFR 1910.147(c)(07)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $1,600.00Gravity: nanIssued: January 25, 2007Abated: ✓ Yes
29 CFR 1910.134(c)(02)
Fall Protection — General Requirements
Other-than-Serious
Penalty: $0.00Gravity: nanIssued: January 25, 2007Abated: Pending
29 CFR 1910.147(c)(04)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $1,700.00Gravity: nanIssued: January 25, 2007Abated: ✓ Yes
29 CFR 1910.147(c)(06)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $0.00Gravity: nanIssued: January 25, 2007Abated: ✓ Yes
29 CFR 1910.147(d)(03)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $1,700.00Gravity: nanIssued: January 25, 2007Abated: ✓ Yes
29 CFR 1910.23(c)(01)
Guarding Floor & Wall Openings
Serious
Penalty: $325.00Gravity: nanIssued: April 8, 2009Abated: ✓ Yes
29 CFR 1910.133(a)(02)
Eye & Face Protection
Serious
Penalty: $325.00Gravity: nanIssued: April 8, 2009Abated: ✓ Yes
29 CFR 1910.212(a)(01)
Machine Guarding — General Requirements
Serious
Penalty: $650.00Gravity: nanIssued: April 8, 2009Abated: ✓ Yes
29 CFR 1910.215(b)(09)
Abrasive Wheel Machinery
Serious
Penalty: $1,050.00Gravity: nanIssued: April 8, 2009Abated: ✓ Yes
29 CFR 1910.212(b)
Machine Guarding — General Requirements
Other-than-Serious
Penalty: $0.00Gravity: nanIssued: April 8, 2009Abated: ✓ Yes
This report is compiled from publicly available U.S. Department of Labor enforcement data under the Freedom of Information Act. SVEP Navigator is an independent research and analysis platform and is not affiliated with, endorsed by, or connected to OSHA, the Department of Labor, or any federal agency. Information is provided for research, educational, and compliance planning purposes only and does not constitute legal advice. Penalty amounts shown are proposed penalties and may have been modified through contest proceedings or settlement.
Local Competitor Benchmark

Comparing penalized facilities in MONROE, NC (Exact Industry)

YALE SECURITY INC. DBA NORTON DOOR CONTROLS (This Facility)
$7.4K
11 cit.
145629 - ASSA ABLOY ACCESSORIES AND DOOR CONTROLS GROUP, I
$13.3K
3 cit.
157487 - ASSA ABLOY ACCESSORIES AND DOOR CONTROLS GROUP,INC
$9.0K
2 cit.
More NC Enforcement Records
IMPERIAL FOOD PRODUCTS, INC.
HAMLET, NC
$808.2K
83 cit.
SOUTHERN INVESTMENTS, LLC
REIDSVILLE, NC
$441.0K
38 cit.
CATALYTICA PHARMACEUTICALS, INC.
GREENVILLE, NC
$372.4K
73 cit.
OSCAR RENDA CONTRACTING, INC.
CONCORD, NC
$292.0K
6 cit.
JOHNSON CONTROLS BATTERY GROUP, INC.
KERNERSVILLE, NC
$284.0K
67 cit.
Other Inspected Facilities in MONROE, NC
139996 - CALLAGHAN - CALLAGHAN, INC.
$89.0K
5 cit.
145277 - ELG UTICA ALLOYS (MONROE) LLC
$84.0K
7 cit.
156500 - NCV CONSTRUCTION LLC
$46.9K
1 cit.
153002 - PS SPLICING, LLC
$40.0K
5 cit.
152001 - DARNEL, INC.
$34.8K
3 cit.
Related Guides & Tools
OSHA Fines & Penalties Guide →
How OSHA calculates penalties and maximum fine amounts.
After an OSHA Inspection →
Citations, appeals, and penalty negotiation steps.
Top 10 OSHA Violations →
The most frequently cited standards nationwide.
Manufacturing Safety Data →
Industry-wide violation stats and rankings.

Explore more: OSHA enforcement in MONROE · North Carolina data · Search the database · Incident Rate Calculator

Frequently Asked Questions
What OSHA violations was YALE SECURITY INC. DBA NORTON DOOR CONTROLS cited for?

YALE SECURITY INC. DBA NORTON DOOR CONTROLS received 11 citation(s) covering 6 distinct OSHA standards. Total proposed penalties were $7,350.00. The inspection opened on 2006-11-08.

How much was YALE SECURITY INC. DBA NORTON DOOR CONTROLS fined by OSHA?

OSHA proposed penalties of $7,350.00 against YALE SECURITY INC. DBA NORTON DOOR CONTROLS in MONROE, NC. Average per citation: $668.18.

Is YALE SECURITY INC. DBA NORTON DOOR CONTROLS a safe workplace?

Based on enforcement records, YALE SECURITY INC. DBA NORTON DOOR CONTROLS has a risk score of 16 out of 100. The volume of citations issued during this inspection suggests systematic compliance deficiencies rather than isolated incidents. Facilities with 10 or more citations typically face comprehensive abatement requirements and may be subject to follow-up inspections.

How does this penalty compare to the industry average?

The average penalty for Hardware Manufacturing facilities is $6,436.62. This facility penalty of $7,350.00 is above the industry average.