Tier 4 Systematic

POLYFILL, LLC

📍 960 N. VANDEMARK RD., SIDNEY, OH 45365🏭 Motor Vehicle Parts Manufacturing (NAICS 336399)📅 2018-08-22
$23,553.50
Total Penalties
10
Citations
19/100
Risk Score
403
Analysis Words
Enforcement Analysis

According to U.S. Department of Labor enforcement records, POLYFILL, LLC — a motor vehicle parts manufacturing facility located at 960 N. VANDEMARK RD., SIDNEY, OH 45365 — was the subject of a formal OSHA inspection that resulted in 10 citation(s) and cumulative proposed penalties of $23,553.50. The inspection case was opened on 2018-08-22.

The volume of citations issued during this inspection suggests systematic compliance deficiencies rather than isolated incidents. Facilities with 10 or more citations typically face comprehensive abatement requirements and may be subject to follow-up inspections.

BLS Injury Data: According to the Bureau of Labor Statistics (2022), this industry sector has an occupational injury rate of 3.3 per 100 full-time workers — 22% above the national average of 2.7. The sector fatality rate is 2.3 per 100,000 workers.

EPA Environmental Record: The EPA shows no current violations for this facility. regulated under: Clean Air Act. Source: EPA ECHO database.

Industry Benchmark: The total penalty of $23,553.50 is more than 3.7× the national average of $6,436.62 for facilities in the Manufacturing sector (NAICS 336399). This sector encompasses 82,943 inspected facilities nationwide with aggregate penalties totaling $533.9M.

State Context: Within OH, this facility's penalty places it at the 98th percentile among 91,405 inspected facilities. The statewide average penalty is $3,818.37.

Citation Analysis: The inspection produced 10 citations spanning 5 distinct OSHA regulatory standards. The citation breakdown includes: 10 serious — A workplace hazard that could cause death or serious physical harm exists, and the employer knew or should have known about the condition.

Enforcement Timeline: Citations were issued beginning October 5, 2015 with the latest abatement deadline set for November 1, 2018. Of the 10 total citations, 0 (0%) have been marked as abated in DOL records, which may indicate ongoing compliance gaps requiring further regulatory attention.

Penalty Assessment: The cumulative penalty of $23,553.50 reflects OSHA's gravity-based penalty calculation methodology, which considers the severity of potential injury, the probability of occurrence, the employer's size, good faith, and violation history. The per-citation average of $2,355.35 falls within the standard penalty range.

The inspection of Polyfill, LLC revealed a concentrated pattern of high-gravity mechanical and electrical hazards,

Industry Benchmark (OH)

This facility's $23,554 penalty is higher than 84% of all penalized companies in the NAICS 336399 industry in OH. The state average penalty for this industry is $12,970.

$12,970
State Avg
$23,554
This Facility
Citation Matrix — 10 Citations
29 CFR 1910.23(c)(01)
Guarding Floor & Wall Openings
Serious
Penalty: $2,625.00Gravity: 5Issued: October 5, 2015Abated: Pending
29 CFR 1910.147(c)(04)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $4,025.00Gravity: 10Issued: October 5, 2015Abated: Pending
29 CFR 1910.147(d)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $0.00Gravity: 10Issued: October 5, 2015Abated: Pending
29 CFR 1910.147(c)(07)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $0.00Gravity: 10Issued: October 5, 2015Abated: Pending
29 CFR 1910.23(c)(03)
Guarding Floor & Wall Openings
Serious
Penalty: $2,450.00Gravity: 10Issued: May 24, 2016Abated: Pending
29 CFR 1910.212(a)(01)
Machine Guarding — General Requirements
Serious
Penalty: $0.00Gravity: 10Issued: May 24, 2016Abated: Pending
29 CFR 1910.303(b)(07)
Electrical — General Requirements
Serious
Penalty: $3,987.00Gravity: 5Issued: December 28, 2016Abated: Pending
29 CFR 1910.305(b)(01)
Electrical — Wiring Methods & Components
Serious
Penalty: $0.00Gravity: 5Issued: December 28, 2016Abated: Pending
29 CFR 1910.212(a)(01)
Machine Guarding — General Requirements
Serious
Penalty: $5,487.00Gravity: 5Issued: December 28, 2016Abated: Pending
29 CFR 1910.212(a)(01)
Machine Guarding — General Requirements
Serious
Penalty: $4,979.50Gravity: 10Issued: October 16, 2018Abated: Pending
This report is compiled from publicly available U.S. Department of Labor enforcement data under the Freedom of Information Act. SVEP Navigator is an independent research and analysis platform and is not affiliated with, endorsed by, or connected to OSHA, the Department of Labor, or any federal agency. Information is provided for research, educational, and compliance planning purposes only and does not constitute legal advice. Penalty amounts shown are proposed penalties and may have been modified through contest proceedings or settlement.
Local Competitor Benchmark

Comparing penalized facilities in SIDNEY, OH (Exact Industry)

POLYFILL, LLC (This Facility)
$23.6K
10 cit.
INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP N.A. INC
$67.3K
13 cit.
LEAR CORPORATION
$15.4K
7 cit.
IAC SIDNEY, LLC
$4.9K
1 cit.
More OH Enforcement Records
SHELL CHEMICAL COMPANY - DIV OF SHELL OIL COMPANY
BELPRE, OH
$3.0M
64 cit.
BP PRODUCTS NORTH AMERICA INC.
OREGON, OH
$2.4M
39 cit.
AK STEEL CORPORATION
MIDDLETOWN, OH
$2.3M
149 cit.
GREAT LAKES TANK & VESSEL LLC
CLEVELAND, OH
$1.6M
46 cit.
MANGANAS PAINTING CO., INC.
LEBANON, OH
$1.1M
61 cit.
Other Inspected Facilities in SIDNEY, OH
FORMED FIBER TECHNOLOGIES, LLC
$450.6K
15 cit.
RELIABLE CASTINGS CORPORATION
$134.2K
34 cit.
IVEX PROTECTIVE PACKAGING INC.
$110.3K
37 cit.
ROSS CASTING & INNOVATION, LLC
$91.0K
20 cit.
FORMED FIBER TECHNOLOGIES, INC
$69.0K
11 cit.
Related Guides & Tools
OSHA Fines & Penalties Guide →
How OSHA calculates penalties and maximum fine amounts.
After an OSHA Inspection →
Citations, appeals, and penalty negotiation steps.
Top 10 OSHA Violations →
The most frequently cited standards nationwide.
Manufacturing Safety Data →
Industry-wide violation stats and rankings.

Explore more: OSHA enforcement in SIDNEY · Ohio data · Search the database · Incident Rate Calculator

Frequently Asked Questions
What OSHA violations was POLYFILL, LLC cited for?

POLYFILL, LLC received 10 citation(s) covering 5 distinct OSHA standards. Total proposed penalties were $23,553.50. The inspection opened on 2018-08-22.

How much was POLYFILL, LLC fined by OSHA?

OSHA proposed penalties of $23,553.50 against POLYFILL, LLC in SIDNEY, OH. Average per citation: $2,355.35.

Is POLYFILL, LLC a safe workplace?

Based on enforcement records, POLYFILL, LLC has a risk score of 19 out of 100. The volume of citations issued during this inspection suggests systematic compliance deficiencies rather than isolated incidents. Facilities with 10 or more citations typically face comprehensive abatement requirements and may be subject to follow-up inspections.

How does this penalty compare to the industry average?

The average penalty for Motor Vehicle Parts Manufacturing facilities is $6,436.62. This facility penalty of $23,553.50 is above the industry average.