Tier 4 Systematic

CONN-SELMER, INC.

📍 2806 MASON STREET, MONROE, NC 28110🏭 Musical Instrument Manufacturing (NAICS 339992)📅 2014-09-30
$14,200.00
Total Penalties
15
Citations
19/100
Risk Score
387
Analysis Words
Enforcement Analysis

According to U.S. Department of Labor enforcement records, CONN-SELMER, INC. — a musical instrument manufacturing facility located at 2806 MASON STREET, MONROE, NC 28110 — was the subject of a formal OSHA inspection that resulted in 15 citation(s) and cumulative proposed penalties of $14,200.00. The inspection case was opened on 2014-09-30.

The volume of citations issued during this inspection suggests systematic compliance deficiencies rather than isolated incidents. Facilities with 10 or more citations typically face comprehensive abatement requirements and may be subject to follow-up inspections.

BLS Injury Data: According to the Bureau of Labor Statistics (2022), this industry sector has an occupational injury rate of 3.3 per 100 full-time workers — 22% above the national average of 2.7. The sector fatality rate is 2.3 per 100,000 workers.

Industry Benchmark: The total penalty of $14,200.00 is more than 2.2× the national average of $6,436.62 for facilities in the Manufacturing sector (NAICS 339992). This sector encompasses 82,943 inspected facilities nationwide with aggregate penalties totaling $533.9M.

State Context: Within NC, this facility's penalty places it at the 98th percentile among 88,256 inspected facilities. The statewide average penalty is $1,699.39.

Citation Analysis: The inspection produced 15 citations spanning 11 distinct OSHA regulatory standards. The citation breakdown includes: 8 serious — A workplace hazard that could cause death or serious physical harm exists, and the employer knew or should have known about the condition. 7 other-than-serious — The violation has a direct relationship to job safety and health but is unlikely to cause death or serious physical harm.

Enforcement Timeline: Citations were issued beginning January 5, 2015 with the latest abatement deadline set for July 12, 2016. Of the 15 total citations, 6 (40%) have been marked as abated in DOL records, which may indicate ongoing compliance gaps requiring further regulatory attention.

Penalty Assessment: The cumulative penalty of $14,200.00 reflects OSHA's gravity-based penalty calculation methodology, which considers the severity of potential injury, the probability of occurrence, the employer's size, good faith, and violation history. The per-citation average of $946.67 falls within the standard penalty range.

Citation Matrix — 15 Citations
29 CFR 9501.2901
Serious
Penalty: $2,250.00Gravity: 05Issued: January 5, 2015Abated: ✓ Yes
29 CFR 1910.95(b)(01)
Serious
Penalty: $2,250.00Gravity: 05Issued: January 5, 2015Abated: ✓ Yes
29 CFR 1910.95(k)(01)
Serious
Penalty: $0.00Gravity: 10Issued: January 5, 2015Abated: Pending
29 CFR 1910.147(c)(01)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $1,300.00Gravity: 04Issued: January 5, 2015Abated: ✓ Yes
29 CFR 1910.178(l)(01)
Powered Industrial Trucks (Forklifts)
Serious
Penalty: $650.00Gravity: 03Issued: January 5, 2015Abated: ✓ Yes
29 CFR 1910.212(a)(01)
Machine Guarding — General Requirements
Serious
Penalty: $4,200.00Gravity: 10Issued: January 5, 2015Abated: ✓ Yes
29 CFR 1910.219(c)(04)
Mechanical Power Transmission
Serious
Penalty: $2,250.00Gravity: 05Issued: January 5, 2015Abated: Pending
29 CFR 1910.219(h)(01)
Mechanical Power Transmission
Serious
Penalty: $0.00Gravity: 03Issued: January 5, 2015Abated: Pending
29 CFR 1910.107(b)(05)
Other-than-Serious
Penalty: $0.00Gravity: 01Issued: January 5, 2015Abated: Pending
29 CFR 1910.107(e)(02)
Other-than-Serious
Penalty: $0.00Gravity: 01Issued: January 5, 2015Abated: Pending
29 CFR 1910.134(c)(02)
Fall Protection — General Requirements
Other-than-Serious
Penalty: $0.00Gravity: 01Issued: January 5, 2015Abated: Pending
29 CFR 1910.157(d)(01)
Portable Fire Extinguishers
Other-than-Serious
Penalty: $650.00Gravity: 03Issued: January 5, 2015Abated: ✓ Yes
29 CFR 1910.305(g)(01)
Electrical — Wiring Methods & Components
Other-than-Serious
Penalty: $0.00Gravity: 01Issued: January 5, 2015Abated: Pending
29 CFR 1910.1200(h)(01)
Hazard Communication Standard (Chemical Safety)
Other-than-Serious
Penalty: $650.00Gravity: 03Issued: January 5, 2015Abated: Pending
29 CFR 1910.1200(f)(10)
Hazard Communication Standard (Chemical Safety)
Other-than-Serious
Penalty: $0.00Gravity: 01Issued: January 5, 2015Abated: Pending
This report is compiled from publicly available U.S. Department of Labor enforcement data under the Freedom of Information Act. SVEP Navigator is an independent research and analysis platform and is not affiliated with, endorsed by, or connected to OSHA, the Department of Labor, or any federal agency. Information is provided for research, educational, and compliance planning purposes only and does not constitute legal advice. Penalty amounts shown are proposed penalties and may have been modified through contest proceedings or settlement.
Local Competitor Benchmark

Comparing penalized facilities in MONROE, NC (Broader Sector)

CONN-SELMER, INC. (This Facility)
$14.2K
15 cit.
CALEDONIAN ALLOYS, INC.
$17.2K
20 cit.
143368 - WDM, INC.
$16.6K
16 cit.
I.O., INC.
$13.8K
34 cit.
More NC Enforcement Records
IMPERIAL FOOD PRODUCTS, INC.
HAMLET, NC
$808.2K
83 cit.
SOUTHERN INVESTMENTS, LLC
REIDSVILLE, NC
$441.0K
38 cit.
CATALYTICA PHARMACEUTICALS, INC.
GREENVILLE, NC
$372.4K
73 cit.
OSCAR RENDA CONTRACTING, INC.
CONCORD, NC
$292.0K
6 cit.
JOHNSON CONTROLS BATTERY GROUP, INC.
KERNERSVILLE, NC
$284.0K
67 cit.
Other Inspected Facilities in MONROE, NC
139996 - CALLAGHAN - CALLAGHAN, INC.
$89.0K
5 cit.
145277 - ELG UTICA ALLOYS (MONROE) LLC
$84.0K
7 cit.
156500 - NCV CONSTRUCTION LLC
$46.9K
1 cit.
153002 - PS SPLICING, LLC
$40.0K
5 cit.
152001 - DARNEL, INC.
$34.8K
3 cit.
Related Guides & Tools
OSHA Fines & Penalties Guide →
How OSHA calculates penalties and maximum fine amounts.
After an OSHA Inspection →
Citations, appeals, and penalty negotiation steps.
Top 10 OSHA Violations →
The most frequently cited standards nationwide.
Manufacturing Safety Data →
Industry-wide violation stats and rankings.

Explore more: OSHA enforcement in MONROE · North Carolina data · Search the database · Incident Rate Calculator

Frequently Asked Questions
What OSHA violations was CONN-SELMER, INC. cited for?

CONN-SELMER, INC. received 15 citation(s) covering 11 distinct OSHA standards. Total proposed penalties were $14,200.00. The inspection opened on 2014-09-30.

How much was CONN-SELMER, INC. fined by OSHA?

OSHA proposed penalties of $14,200.00 against CONN-SELMER, INC. in MONROE, NC. Average per citation: $946.67.

Is CONN-SELMER, INC. a safe workplace?

Based on enforcement records, CONN-SELMER, INC. has a risk score of 19 out of 100. The volume of citations issued during this inspection suggests systematic compliance deficiencies rather than isolated incidents. Facilities with 10 or more citations typically face comprehensive abatement requirements and may be subject to follow-up inspections.

How does this penalty compare to the industry average?

The average penalty for Musical Instrument Manufacturing facilities is $6,436.62. This facility penalty of $14,200.00 is above the industry average.