Tier 5 Standard

ALJO - GEFA PRECISION MFG., LLC

📍 205 SWEET HOLLOW RD, OLD BETHPAGE, NY 11804🏭 Fabricated Structural Metal Manufacturing (NAICS 332312)📅 2012-02-14
$5,000.00
Total Penalties
7
Citations
4/100
Risk Score
371
Analysis Words
Enforcement Analysis

According to U.S. Department of Labor enforcement records, ALJO - GEFA PRECISION MFG., LLC — a fabricated structural metal manufacturing facility located at 205 SWEET HOLLOW RD, OLD BETHPAGE, NY 11804 — was the subject of a formal OSHA inspection that resulted in 7 citation(s) and cumulative proposed penalties of $5,000.00. The inspection case was opened on 2012-02-14.

DOL records document workplace safety violations warranting formal citation under the OSH Act. While classified at the standard enforcement level, all OSHA citations require corrective action and may indicate areas where workplace safety programs should be strengthened.

BLS Injury Data: According to the Bureau of Labor Statistics (2022), this industry sector has an occupational injury rate of 3.3 per 100 full-time workers — 22% above the national average of 2.7. The sector fatality rate is 2.3 per 100,000 workers.

Industry Benchmark: The total penalty of $5,000.00 is 22% below the national average of $6,436.62 for facilities in the Manufacturing sector (NAICS 332312). This sector encompasses 82,943 inspected facilities nationwide with aggregate penalties totaling $533.9M.

State Context: Within NY, this facility's penalty places it at the 90th percentile among 140,736 inspected facilities. The statewide average penalty is $2,208.33.

Citation Analysis: The inspection produced 7 citations spanning 3 distinct OSHA regulatory standards. The citation breakdown includes: 7 serious — A workplace hazard that could cause death or serious physical harm exists, and the employer knew or should have known about the condition.

Enforcement Timeline: Citations were issued beginning July 23, 2012 with the latest abatement deadline set for November 4, 2012. Of the 7 total citations, 0 (0%) have been marked as abated in DOL records, which may indicate ongoing compliance gaps requiring further regulatory attention.

Penalty Assessment: The total proposed penalty of $5,000.00 falls within OSHA's standard enforcement range and may have been adjusted through informal settlement conference procedures, penalty reduction factors, or good faith credit for demonstrated safety and health management systems.

Industry Benchmark (NY)

This facility's $5,000 penalty is higher than 54% of all penalized companies in the NAICS 332312 industry in NY. The state average penalty for this industry is $8,015.

$8,015
State Avg
$5,000
This Facility
Citation Matrix — 7 Citations
29 CFR 1910.147(c)(01)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $3,000.00Gravity: 5Issued: July 23, 2012Abated: Pending
29 CFR 1910.147(c)(04)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $0.00Gravity: 5Issued: July 23, 2012Abated: Pending
29 CFR 1910.147(c)(05)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $0.00Gravity: 5Issued: July 23, 2012Abated: Pending
29 CFR 1910.147(c)(07)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $0.00Gravity: 5Issued: July 23, 2012Abated: Pending
29 CFR 1910.215(a)(04)
Abrasive Wheel Machinery
Serious
Penalty: $1,000.00Gravity: 5Issued: July 23, 2012Abated: Pending
29 CFR 1910.219(d)(01)
Mechanical Power Transmission
Serious
Penalty: $1,000.00Gravity: 5Issued: July 23, 2012Abated: Pending
29 CFR 1910.219(e)(03)
Mechanical Power Transmission
Serious
Penalty: $0.00Gravity: 5Issued: July 23, 2012Abated: Pending
This report is compiled from publicly available U.S. Department of Labor enforcement data under the Freedom of Information Act. SVEP Navigator is an independent research and analysis platform and is not affiliated with, endorsed by, or connected to OSHA, the Department of Labor, or any federal agency. Information is provided for research, educational, and compliance planning purposes only and does not constitute legal advice. Penalty amounts shown are proposed penalties and may have been modified through contest proceedings or settlement.
Local Competitor Benchmark

Comparing penalized facilities in OLD BETHPAGE, NY (Broader Sector)

ALJO - GEFA PRECISION MFG., LLC (This Facility)
$5.0K
7 cit.
HITEMCO
$3.0K
6 cit.
AHRENS ASSOCIATES INC.
$1.5K
1 cit.
More NY Enforcement Records
ALJ HOME IMPROVEMENT INC
SPRING VALLEY, NY
$1.3M
12 cit.
FRAZER & JONES, LLC
SYRACUSE, NY
$1.0M
34 cit.
DME CONSTRUCTION ASSOCIATES INC.
OLD BETHPAGE, NY
$600.0K
13 cit.
MC WANE, INC. DBA KENNEDY VALVE
ELMIRA, NY
$575.4K
204 cit.
ELITE ROOFING SERVICES, INC.
GLEN COVE, NY
$522.5K
7 cit.
Other Inspected Facilities in OLD BETHPAGE, NY
DME CONSTRUCTION ASSOCIATES INC.
$600.0K
13 cit.
NEW ENGLAND MOTOR FREIGHT, INC.
$10.0K
6 cit.
APA TRANSPORT CORP.
$9.5K
15 cit.
INTERNATIONAL WAREHOUSE GROUP INC.
$7.7K
6 cit.
ALUMINUM LOUVRE CORPORATION
$4.4K
19 cit.
Related Guides & Tools
OSHA Fines & Penalties Guide →
How OSHA calculates penalties and maximum fine amounts.
Top 10 OSHA Violations →
The most frequently cited standards nationwide.
Manufacturing Safety Data →
Industry-wide violation stats and rankings.
Penalty Calculator →
Estimate fines by violation type, industry, and size.

Explore more: OSHA enforcement in OLD BETHPAGE · New York data · Search the database · Incident Rate Calculator

Frequently Asked Questions
What OSHA violations was ALJO - GEFA PRECISION MFG., LLC cited for?

ALJO - GEFA PRECISION MFG., LLC received 7 citation(s) covering 3 distinct OSHA standards. Total proposed penalties were $5,000.00. The inspection opened on 2012-02-14.

How much was ALJO - GEFA PRECISION MFG., LLC fined by OSHA?

OSHA proposed penalties of $5,000.00 against ALJO - GEFA PRECISION MFG., LLC in OLD BETHPAGE, NY. Average per citation: $714.29.

Is ALJO - GEFA PRECISION MFG., LLC a safe workplace?

Based on enforcement records, ALJO - GEFA PRECISION MFG., LLC has a risk score of 4 out of 100. DOL records document workplace safety violations warranting formal citation under the OSH Act. While classified at the standard enforcement level, all OSHA citations require corrective action and may indicate areas where workplace safety programs should be strengthened.

How does this penalty compare to the industry average?

The average penalty for Fabricated Structural Metal Manufacturing facilities is $6,436.62. This facility penalty of $5,000.00 is below the industry average.