Tier 4 Systematic

TEXAS MACHINE WORKS

📍 5860 ALAMEDA AVE., EL PASO, TX 79915🏭 Machine Shops (NAICS 332710)📅 2016-11-28
$16,200.00
Total Penalties
15
Citations
20/100
Risk Score
366
Analysis Words
Enforcement Analysis

According to U.S. Department of Labor enforcement records, TEXAS MACHINE WORKS — a machine shops facility located at 5860 ALAMEDA AVE., EL PASO, TX 79915 — was the subject of a formal OSHA inspection that resulted in 15 citation(s) and cumulative proposed penalties of $16,200.00. The inspection case was opened on 2016-11-28.

The volume of citations issued during this inspection suggests systematic compliance deficiencies rather than isolated incidents. Facilities with 10 or more citations typically face comprehensive abatement requirements and may be subject to follow-up inspections.

BLS Injury Data: According to the Bureau of Labor Statistics (2022), this industry sector has an occupational injury rate of 3.3 per 100 full-time workers — 22% above the national average of 2.7. The sector fatality rate is 2.3 per 100,000 workers.

Industry Benchmark: The total penalty of $16,200.00 is more than 2.5× the national average of $6,436.62 for facilities in the Manufacturing sector (NAICS 332710). This sector encompasses 82,943 inspected facilities nationwide with aggregate penalties totaling $533.9M.

State Context: Within TX, this facility's penalty places it at the 97th percentile among 119,485 inspected facilities. The statewide average penalty is $3,783.80.

Citation Analysis: The inspection produced 15 citations spanning 9 distinct OSHA regulatory standards. The citation breakdown includes: 15 serious — A workplace hazard that could cause death or serious physical harm exists, and the employer knew or should have known about the condition.

Enforcement Timeline: Citations were issued beginning February 16, 2017 with the latest abatement deadline set for March 17, 2017. Of the 15 total citations, 0 (0%) have been marked as abated in DOL records, which may indicate ongoing compliance gaps requiring further regulatory attention.

Penalty Assessment: The cumulative penalty of $16,200.00 reflects OSHA's gravity-based penalty calculation methodology, which considers the severity of potential injury, the probability of occurrence, the employer's size, good faith, and violation history. The per-citation average of $1,080.00 falls within the standard penalty range.

Industry Benchmark (TX)

This facility's $16,200 penalty is higher than 92% of all penalized companies in the NAICS 332710 industry in TX. The state average penalty for this industry is $8,125.

$8,125
State Avg
$16,200
This Facility
Citation Matrix — 15 Citations
29 CFR 1910.22(a)(01)
Walking-Working Surfaces — General
Serious
Penalty: $1,700.00Gravity: 5Issued: February 16, 2017Abated: Pending
29 CFR 1910.179(b)(02)
Serious
Penalty: $1,200.00Gravity: 5Issued: February 16, 2017Abated: Pending
29 CFR 1910.215(a)(04)
Abrasive Wheel Machinery
Serious
Penalty: $1,700.00Gravity: 5Issued: February 16, 2017Abated: Pending
29 CFR 1910.215(b)(09)
Abrasive Wheel Machinery
Serious
Penalty: $0.00Gravity: 5Issued: February 16, 2017Abated: Pending
29 CFR 1910.212(a)(01)
Machine Guarding — General Requirements
Serious
Penalty: $1,700.00Gravity: 5Issued: February 16, 2017Abated: Pending
29 CFR 1910.219(f)(01)
Mechanical Power Transmission
Serious
Penalty: $0.00Gravity: 5Issued: February 16, 2017Abated: Pending
29 CFR 1910.243(c)(03)
Serious
Penalty: $1,700.00Gravity: 5Issued: February 16, 2017Abated: Pending
29 CFR 1910.253(b)(02)
Serious
Penalty: $1,200.00Gravity: 5Issued: February 16, 2017Abated: Pending
29 CFR 1910.253(b)(04)
Serious
Penalty: $0.00Gravity: 5Issued: February 16, 2017Abated: Pending
29 CFR 1910.304(g)(05)
Electrical — Wiring Design & Protection
Serious
Penalty: $1,200.00Gravity: 5Issued: February 16, 2017Abated: Pending
29 CFR 1910.305(b)(01)
Electrical — Wiring Methods & Components
Serious
Penalty: $1,200.00Gravity: 5Issued: February 16, 2017Abated: Pending
29 CFR 1910.305(b)(02)
Electrical — Wiring Methods & Components
Serious
Penalty: $1,700.00Gravity: 5Issued: February 16, 2017Abated: Pending
29 CFR 1910.305(g)(01)
Electrical — Wiring Methods & Components
Serious
Penalty: $1,200.00Gravity: 5Issued: February 16, 2017Abated: Pending
29 CFR 1910.305(g)(02)
Electrical — Wiring Methods & Components
Serious
Penalty: $1,700.00Gravity: 5Issued: February 16, 2017Abated: Pending
29 CFR 1910.305(g)(02)
Electrical — Wiring Methods & Components
Serious
Penalty: $0.00Gravity: 5Issued: February 16, 2017Abated: Pending
This report is compiled from publicly available U.S. Department of Labor enforcement data under the Freedom of Information Act. SVEP Navigator is an independent research and analysis platform and is not affiliated with, endorsed by, or connected to OSHA, the Department of Labor, or any federal agency. Information is provided for research, educational, and compliance planning purposes only and does not constitute legal advice. Penalty amounts shown are proposed penalties and may have been modified through contest proceedings or settlement.
Local Competitor Benchmark

Comparing penalized facilities in EL PASO, TX (Exact Industry)

TEXAS MACHINE WORKS (This Facility)
$16.2K
15 cit.
DYNAMIC TOOL CO., INC.
$333.1K
62 cit.
G & C MOLD CORPORATION
$13.4K
3 cit.
GREAT SOUTHWEST TOOL CO.
$8.3K
7 cit.
More TX Enforcement Records
BP PRODUCTS NORTH AMERICA, INC.
TEXAS CITY, TX
$38.1M
1215 cit.
PHILLIPS 66 COMPANY,HOUSTON CHEMICAL COMPLEX
PASADENA, TX
$4.0M
612 cit.
ARCO CHEMICAL CO.
CHANNELVIEW, TX
$3.5M
367 cit.
PHILLIPS PETROLEUM CO.
PASADENA, TX
$2.2M
52 cit.
WYMAN-GORDON FORGINGS, LP
HOUSTON, TX
$1.9M
96 cit.
Other Inspected Facilities in EL PASO, TX
DYNAMIC TOOL CO., INC.
$333.1K
62 cit.
JOBE MATERIALS, L.P.
$264.8K
19 cit.
ARIZONA TRADERS CO.
$146.3K
28 cit.
SILVERTON CONSTRUCTION CO., INC.
$143.7K
10 cit.
STAMPCOAT, INC.
$125.2K
68 cit.
Related Guides & Tools
OSHA Fines & Penalties Guide →
How OSHA calculates penalties and maximum fine amounts.
After an OSHA Inspection →
Citations, appeals, and penalty negotiation steps.
Top 10 OSHA Violations →
The most frequently cited standards nationwide.
Manufacturing Safety Data →
Industry-wide violation stats and rankings.

Explore more: OSHA enforcement in EL PASO · Texas data · Search the database · Incident Rate Calculator

Frequently Asked Questions
What OSHA violations was TEXAS MACHINE WORKS cited for?

TEXAS MACHINE WORKS received 15 citation(s) covering 9 distinct OSHA standards. Total proposed penalties were $16,200.00. The inspection opened on 2016-11-28.

How much was TEXAS MACHINE WORKS fined by OSHA?

OSHA proposed penalties of $16,200.00 against TEXAS MACHINE WORKS in EL PASO, TX. Average per citation: $1,080.00.

Is TEXAS MACHINE WORKS a safe workplace?

Based on enforcement records, TEXAS MACHINE WORKS has a risk score of 20 out of 100. The volume of citations issued during this inspection suggests systematic compliance deficiencies rather than isolated incidents. Facilities with 10 or more citations typically face comprehensive abatement requirements and may be subject to follow-up inspections.

How does this penalty compare to the industry average?

The average penalty for Machine Shops facilities is $6,436.62. This facility penalty of $16,200.00 is above the industry average.