Tier 4 Systematic

TDK FERRITES CORPORATION

📍 5900 N. HARRISON, SHAWNEE, OK 74804🏭 Powder Metallurgy Part Manufacturing (NAICS 332117)📅 2003-11-06
$10,250.00
Total Penalties
20
Citations
22/100
Risk Score
385
Analysis Words
Enforcement Analysis

According to U.S. Department of Labor enforcement records, TDK FERRITES CORPORATION — a powder metallurgy part manufacturing facility located at 5900 N. HARRISON, SHAWNEE, OK 74804 — was the subject of a formal OSHA inspection that resulted in 20 citation(s) and cumulative proposed penalties of $10,250.00. The inspection case was opened on 2003-11-06.

The volume of citations issued during this inspection suggests systematic compliance deficiencies rather than isolated incidents. Facilities with 10 or more citations typically face comprehensive abatement requirements and may be subject to follow-up inspections.

BLS Injury Data: According to the Bureau of Labor Statistics (2022), this industry sector has an occupational injury rate of 3.3 per 100 full-time workers — 22% above the national average of 2.7. The sector fatality rate is 2.3 per 100,000 workers.

Industry Benchmark: The total penalty of $10,250.00 is 59% above the national average of $6,436.62 for facilities in the Manufacturing sector (NAICS 332117). This sector encompasses 82,943 inspected facilities nationwide with aggregate penalties totaling $533.9M.

State Context: Within OK, this facility's penalty places it at the 96th percentile among 20,827 inspected facilities. The statewide average penalty is $2,560.36.

Citation Analysis: The inspection produced 20 citations spanning 8 distinct OSHA regulatory standards. The citation breakdown includes: 13 serious — A workplace hazard that could cause death or serious physical harm exists, and the employer knew or should have known about the condition. 2 other-than-serious — The violation has a direct relationship to job safety and health but is unlikely to cause death or serious physical harm.

Enforcement Timeline: Citations were issued beginning February 27, 2004 with the latest abatement deadline set for February 3, 2008. Of the 20 total citations, 15 (75%) have been marked as abated in DOL records, suggesting partial progress toward required corrective actions.

Penalty Assessment: The cumulative penalty of $10,250.00 reflects OSHA's gravity-based penalty calculation methodology, which considers the severity of potential injury, the probability of occurrence, the employer's size, good faith, and violation history. The per-citation average of $512.50 falls within the standard penalty range.

Citation Matrix — 20 Citations
29 CFR 1910.145(c)(02)
Serious
Penalty: $2,450.00Gravity: 05Issued: January 16, 2008Abated: ✓ Yes
29 CFR 1910.23(c)(01)
Guarding Floor & Wall Openings
Serious
Penalty: $2,275.00Gravity: 05Issued: February 27, 2004Abated: ✓ Yes
29 CFR 1910.36(g)(02)
Serious
Penalty: $975.00Gravity: 01Issued: February 27, 2004Abated: ✓ Yes
29 CFR 1910.37(a)(03)
Maintenance of Exit Routes
Serious
Penalty: $0.00Gravity: 01Issued: February 27, 2004Abated: ✓ Yes
29 CFR 1910.37(a)(04)
Maintenance of Exit Routes
Serious
Penalty: $0.00Gravity: 01Issued: February 27, 2004Abated: ✓ Yes
29 CFR 1910.37(b)(04)
Maintenance of Exit Routes
Serious
Penalty: $0.00Gravity: 01Issued: February 27, 2004Abated: ✓ Yes
29 CFR 1910.179(l)(03)
Serious
Penalty: $1,625.00Gravity: 03Issued: February 27, 2004Abated: ✓ Yes
29 CFR 1910.179(n)(04)
Serious
Penalty: $0.00Gravity: 03Issued: February 27, 2004Abated: ✓ Yes
29 CFR 1910.212(a)(01)
Machine Guarding — General Requirements
Serious
Penalty: $1,625.00Gravity: 03Issued: February 27, 2004Abated: ✓ Yes
29 CFR 1910.169(b)(03)
Other-than-Serious
Penalty: $0.00Gravity: 01Issued: February 27, 2004Abated: ✓ Yes
29 CFR 1910.179(m)(01)
Other-than-Serious
Penalty: $0.00Gravity: 01Issued: February 27, 2004Abated: ✓ Yes
29 CFR 1910.212(a)(03)
Machine Guarding — General Requirements
Serious
Penalty: $0.00Gravity: 03Issued: February 27, 2004Abated: ✓ Yes
29 CFR 1910.219(c)(02)
Mechanical Power Transmission
Serious
Penalty: $1,300.00Gravity: 02Issued: February 27, 2004Abated: ✓ Yes
29 CFR 1910.219(d)(01)
Mechanical Power Transmission
Serious
Penalty: $0.00Gravity: 02Issued: February 27, 2004Abated: ✓ Yes
29 CFR 1910.219(e)(03)
Mechanical Power Transmission
Serious
Penalty: $0.00Gravity: 02Issued: February 27, 2004Abated: ✓ Yes
This report is compiled from publicly available U.S. Department of Labor enforcement data under the Freedom of Information Act. SVEP Navigator is an independent research and analysis platform and is not affiliated with, endorsed by, or connected to OSHA, the Department of Labor, or any federal agency. Information is provided for research, educational, and compliance planning purposes only and does not constitute legal advice. Penalty amounts shown are proposed penalties and may have been modified through contest proceedings or settlement.
Local Competitor Benchmark

Comparing penalized facilities in SHAWNEE, OK (Broader Sector)

TDK FERRITES CORPORATION (This Facility)
$10.3K
20 cit.
DEXTER AXLE
$22.0K
5 cit.
BISON METAL TECHNOLOGIES, LLC.
$19.2K
3 cit.
SHAWNEE STEEL COMPANY
$3.5K
17 cit.
More OK Enforcement Records
C-P-C-G OKLAHOMA CITY PLANT-GENERAL MOTORS CORP.
OKLAHOMA CITY, OK
$2.8M
61 cit.
CINTAS CORPORATION
TULSA, OK
$2.5M
46 cit.
DAYTON TIRE COMPANY
OKLAHOMA CITY, OK
$763.1K
151 cit.
CHIEF SUPPLY CORP.
OKLAHOMA CITY, OK
$465.8K
79 cit.
WYNNEWOOD REFINING COMPANY
WYNNEWOOD, OK
$449.3K
111 cit.
Other Inspected Facilities in SHAWNEE, OK
SHAWNEE MILLING COMPANY
$57.0K
36 cit.
TDK FERRITES, CORP.
$56.8K
18 cit.
SHAWNEE MILLING CO
$55.0K
29 cit.
JERLOW CONSTRUCTION CO.
$50.0K
4 cit.
LEEDAR, INC.
$30.0K
26 cit.
Related Guides & Tools
OSHA Fines & Penalties Guide →
How OSHA calculates penalties and maximum fine amounts.
After an OSHA Inspection →
Citations, appeals, and penalty negotiation steps.
Top 10 OSHA Violations →
The most frequently cited standards nationwide.
Manufacturing Safety Data →
Industry-wide violation stats and rankings.

Explore more: OSHA enforcement in SHAWNEE · Oklahoma data · Search the database · Incident Rate Calculator

Frequently Asked Questions
What OSHA violations was TDK FERRITES CORPORATION cited for?

TDK FERRITES CORPORATION received 20 citation(s) covering 8 distinct OSHA standards. Total proposed penalties were $10,250.00. The inspection opened on 2003-11-06.

How much was TDK FERRITES CORPORATION fined by OSHA?

OSHA proposed penalties of $10,250.00 against TDK FERRITES CORPORATION in SHAWNEE, OK. Average per citation: $512.50.

Is TDK FERRITES CORPORATION a safe workplace?

Based on enforcement records, TDK FERRITES CORPORATION has a risk score of 22 out of 100. The volume of citations issued during this inspection suggests systematic compliance deficiencies rather than isolated incidents. Facilities with 10 or more citations typically face comprehensive abatement requirements and may be subject to follow-up inspections.

How does this penalty compare to the industry average?

The average penalty for Powder Metallurgy Part Manufacturing facilities is $6,436.62. This facility penalty of $10,250.00 is above the industry average.