Tier 4 Systematic

MONTANA METAL PRODUCTS LLC

📍 25 E. HOWARD ST, DES PLAINES, IL 60018🏭 Sheet Metal Work Manufacturing (NAICS 332322)📅 2011-10-19
$21,948.50
Total Penalties
20
Citations
24/100
Risk Score
383
Analysis Words
Enforcement Analysis

According to U.S. Department of Labor enforcement records, MONTANA METAL PRODUCTS LLC — a sheet metal work manufacturing facility located at 25 E. HOWARD ST, DES PLAINES, IL 60018 — was the subject of a formal OSHA inspection that resulted in 20 citation(s) and cumulative proposed penalties of $21,948.50. The inspection case was opened on 2011-10-19.

The volume of citations issued during this inspection suggests systematic compliance deficiencies rather than isolated incidents. Facilities with 10 or more citations typically face comprehensive abatement requirements and may be subject to follow-up inspections.

BLS Injury Data: According to the Bureau of Labor Statistics (2022), this industry sector has an occupational injury rate of 3.3 per 100 full-time workers — 22% above the national average of 2.7. The sector fatality rate is 2.3 per 100,000 workers.

Industry Benchmark: The total penalty of $21,948.50 is more than 3.4× the national average of $6,436.62 for facilities in the Manufacturing sector (NAICS 332322). This sector encompasses 82,943 inspected facilities nationwide with aggregate penalties totaling $533.9M.

State Context: Within IL, this facility's penalty places it at the 98th percentile among 88,899 inspected facilities. The statewide average penalty is $3,496.90.

Citation Analysis: The inspection produced 20 citations spanning 8 distinct OSHA regulatory standards. The citation breakdown includes: 15 serious — A workplace hazard that could cause death or serious physical harm exists, and the employer knew or should have known about the condition.

Enforcement Timeline: Citations were issued beginning March 9, 2005 with the latest abatement deadline set for May 18, 2011. Of the 20 total citations, 11 (55%) have been marked as abated in DOL records, suggesting partial progress toward required corrective actions.

Penalty Assessment: The cumulative penalty of $21,948.50 reflects OSHA's gravity-based penalty calculation methodology, which considers the severity of potential injury, the probability of occurrence, the employer's size, good faith, and violation history. The per-citation average of $1,097.43 falls within the standard penalty range.

The enforcement record for Montana Metal Products LLC reveals a systemic breakdown in fundamental safety and

Industry Benchmark (IL)

This facility's $21,949 penalty is higher than 88% of all penalized companies in the NAICS 332322 industry in IL. The state average penalty for this industry is $10,763.

$10,763
State Avg
$21,949
This Facility
Citation Matrix — 20 Citations
29 CFR 1910.147(c)(04)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $800.00Gravity: 03Issued: March 9, 2005Abated: ✓ Yes
29 CFR 1910.147(c)(06)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $0.00Gravity: 03Issued: March 9, 2005Abated: ✓ Yes
29 CFR 1910.212(a)(03)
Machine Guarding — General Requirements
Serious
Penalty: $2,200.00Gravity: 10Issued: March 9, 2005Abated: ✓ Yes
29 CFR 1910.212(a)(01)
Machine Guarding — General Requirements
Serious
Penalty: $1,625.00Gravity: 03Issued: April 20, 2007Abated: Pending
29 CFR 1910.212(a)(03)
Machine Guarding — General Requirements
Serious
Penalty: $4,000.00Gravity: 10Issued: April 20, 2007Abated: ✓ Yes
29 CFR 1910.217(d)(09)
Mechanical Power Presses
Serious
Penalty: $1,625.00Gravity: 03Issued: April 20, 2007Abated: ✓ Yes
29 CFR 1910.217(e)(01)
Mechanical Power Presses
Serious
Penalty: $1,625.00Gravity: 03Issued: April 20, 2007Abated: ✓ Yes
29 CFR 1910.303(b)(02)
Electrical — General Requirements
Serious
Penalty: $1,300.00Gravity: 02Issued: April 20, 2007Abated: Pending
29 CFR 1910.219(d)(01)
Mechanical Power Transmission
Serious
Penalty: $773.50Gravity: 02Issued: June 5, 2009Abated: Pending
29 CFR 1910.219(e)(01)
Mechanical Power Transmission
Serious
Penalty: $0.00Gravity: 02Issued: June 5, 2009Abated: Pending
29 CFR 1910.95(b)(01)
Serious
Penalty: $2,000.00Gravity: 10Issued: January 7, 2011Abated: ✓ Yes
29 CFR 1910.95(c)(01)
Serious
Penalty: $2,000.00Gravity: 05Issued: January 10, 2011Abated: ✓ Yes
29 CFR 1910.95(k)(01)
Serious
Penalty: $2,000.00Gravity: 10Issued: January 11, 2011Abated: ✓ Yes
29 CFR 1910.124(h)(04)
Serious
Penalty: $500.00Gravity: 01Issued: January 11, 2011Abated: ✓ Yes
29 CFR 1910.134(c)(01)
Fall Protection — General Requirements
Serious
Penalty: $500.00Gravity: 01Issued: January 11, 2011Abated: ✓ Yes
This report is compiled from publicly available U.S. Department of Labor enforcement data under the Freedom of Information Act. SVEP Navigator is an independent research and analysis platform and is not affiliated with, endorsed by, or connected to OSHA, the Department of Labor, or any federal agency. Information is provided for research, educational, and compliance planning purposes only and does not constitute legal advice. Penalty amounts shown are proposed penalties and may have been modified through contest proceedings or settlement.
Local Competitor Benchmark

Comparing penalized facilities in DES PLAINES, IL (Exact Industry)

MONTANA METAL PRODUCTS LLC (This Facility)
$21.9K
20 cit.
NU-WAY INDUSTRIES, INC.
$67.5K
41 cit.
PERFECT TEMPERATURE CONTROL, INC. DBA FAB-RITE SHEET METAL
$11.8K
10 cit.
More IL Enforcement Records
MIRACAPO PIZZA COMPANY LLC DBA LITTLE LADY FOODS
GURNEE, IL
$3.1M
32 cit.
ALL-FEED PROCESSING AND PACKAGING, INC.
GALVA, IL
$1.3M
135 cit.
CLARK OIL REFINING CORPORATION
BLUE ISLAND, IL
$1.3M
82 cit.
AB SPECIALTY SILICONES, LLC
WAUKEGAN, IL
$1.2M
21 cit.
MIDWEST METALLICS L.P.
SUMMITT, IL
$794.2K
52 cit.
Other Inspected Facilities in DES PLAINES, IL
MIKE NERI SEWER & WATER CONTRACTOR
$261.4K
12 cit.
THE CHICAGO FAUCET COMPANY
$201.1K
100 cit.
ACTIVE ROOFING COMPANY, INC.
$118.4K
4 cit.
PITTSBURG TANK & TOWER CO., INC.
$100.0K
27 cit.
GERARDI SEWER & WATER CO.
$94.7K
4 cit.
Related Guides & Tools
OSHA Fines & Penalties Guide →
How OSHA calculates penalties and maximum fine amounts.
After an OSHA Inspection →
Citations, appeals, and penalty negotiation steps.
Top 10 OSHA Violations →
The most frequently cited standards nationwide.
Manufacturing Safety Data →
Industry-wide violation stats and rankings.

Explore more: OSHA enforcement in DES PLAINES · Illinois data · Search the database · Incident Rate Calculator

Frequently Asked Questions
What OSHA violations was MONTANA METAL PRODUCTS LLC cited for?

MONTANA METAL PRODUCTS LLC received 20 citation(s) covering 8 distinct OSHA standards. Total proposed penalties were $21,948.50. The inspection opened on 2011-10-19.

How much was MONTANA METAL PRODUCTS LLC fined by OSHA?

OSHA proposed penalties of $21,948.50 against MONTANA METAL PRODUCTS LLC in DES PLAINES, IL. Average per citation: $1,097.43.

Is MONTANA METAL PRODUCTS LLC a safe workplace?

Based on enforcement records, MONTANA METAL PRODUCTS LLC has a risk score of 24 out of 100. The volume of citations issued during this inspection suggests systematic compliance deficiencies rather than isolated incidents. Facilities with 10 or more citations typically face comprehensive abatement requirements and may be subject to follow-up inspections.

How does this penalty compare to the industry average?

The average penalty for Sheet Metal Work Manufacturing facilities is $6,436.62. This facility penalty of $21,948.50 is above the industry average.