Tier 5 Standard

ELMIRA STAMPING & MFG. CORP.

📍 1704 CEDAR STREET, ELMIRA, NY 14904🏭 Metal Crown, Closure, and Other Metal Stamping (except Automotive) (NAICS 332119)📅 2025-01-07
$15,368.00
Total Penalties
6
Citations
6/100
Risk Score
378
Analysis Words
Enforcement Analysis

According to U.S. Department of Labor enforcement records, ELMIRA STAMPING & MFG. CORP. — a metal crown, closure, and other metal stamping (except automotive) facility located at 1704 CEDAR STREET, ELMIRA, NY 14904 — was the subject of a formal OSHA inspection that resulted in 6 citation(s) and cumulative proposed penalties of $15,368.00. The inspection case was opened on 2025-01-07.

DOL records document workplace safety violations warranting formal citation under the OSH Act. While classified at the standard enforcement level, all OSHA citations require corrective action and may indicate areas where workplace safety programs should be strengthened.

BLS Injury Data: According to the Bureau of Labor Statistics (2022), this industry sector has an occupational injury rate of 3.3 per 100 full-time workers — 22% above the national average of 2.7. The sector fatality rate is 2.3 per 100,000 workers.

Industry Benchmark: The total penalty of $15,368.00 is more than 2.4× the national average of $6,436.62 for facilities in the Manufacturing sector (NAICS 332119). This sector encompasses 82,943 inspected facilities nationwide with aggregate penalties totaling $533.9M.

State Context: Within NY, this facility's penalty places it at the 98th percentile among 140,736 inspected facilities. The statewide average penalty is $2,208.33.

Citation Analysis: The inspection produced 6 citations spanning 3 distinct OSHA regulatory standards. The citation breakdown includes: 6 serious — A workplace hazard that could cause death or serious physical harm exists, and the employer knew or should have known about the condition.

Enforcement Timeline: Citations were issued beginning May 29, 2025 with the latest abatement deadline set for September 2, 2025. Of the 6 total citations, 0 (0%) have been marked as abated in DOL records, which may indicate ongoing compliance gaps requiring further regulatory attention.

Penalty Assessment: The cumulative penalty of $15,368.00 reflects OSHA's gravity-based penalty calculation methodology, which considers the severity of potential injury, the probability of occurrence, the employer's size, good faith, and violation history. The per-citation average of $2,561.33 falls within the standard penalty range.

Industry Benchmark (NY)

This facility's $15,368 penalty is higher than 87% of all penalized companies in the NAICS 332119 industry in NY. The state average penalty for this industry is $14,891.

$14,891
State Avg
$15,368
This Facility
Citation Matrix — 6 Citations
29 CFR 1910.147(c)(06)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $6,620.00Gravity: 5Issued: May 29, 2025Abated: Pending
29 CFR 1910.147(c)(07)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $0.00Gravity: 10Issued: May 29, 2025Abated: Pending
29 CFR 1910.217(d)(01)
Mechanical Power Presses
Serious
Penalty: $6,620.00Gravity: 10Issued: May 29, 2025Abated: Pending
29 CFR 1910.217(d)(01)
Mechanical Power Presses
Serious
Penalty: $0.00Gravity: 10Issued: May 29, 2025Abated: Pending
29 CFR 1910.217(e)(01)
Mechanical Power Presses
Serious
Penalty: $0.00Gravity: 10Issued: May 29, 2025Abated: Pending
29 CFR 1910.1200(h)(01)
Hazard Communication Standard (Chemical Safety)
Serious
Penalty: $2,128.00Gravity: 1Issued: May 29, 2025Abated: Pending
This report is compiled from publicly available U.S. Department of Labor enforcement data under the Freedom of Information Act. SVEP Navigator is an independent research and analysis platform and is not affiliated with, endorsed by, or connected to OSHA, the Department of Labor, or any federal agency. Information is provided for research, educational, and compliance planning purposes only and does not constitute legal advice. Penalty amounts shown are proposed penalties and may have been modified through contest proceedings or settlement.
Local Competitor Benchmark

Comparing penalized facilities in ELMIRA, NY (Broader Sector)

ELMIRA STAMPING & MFG. CORP. (This Facility)
$15.4K
6 cit.
HARDINGE INC.
$30.6K
32 cit.
AIR-FLO MANUFACTURING, INC.
$28.6K
14 cit.
EVOLUTION EDGES A DIVISION OF CHEMUNG SUPPLY
$16.9K
6 cit.
More NY Enforcement Records
ALJ HOME IMPROVEMENT INC
SPRING VALLEY, NY
$1.3M
12 cit.
FRAZER & JONES, LLC
SYRACUSE, NY
$1.0M
34 cit.
DME CONSTRUCTION ASSOCIATES INC.
OLD BETHPAGE, NY
$600.0K
13 cit.
MC WANE, INC. DBA KENNEDY VALVE
ELMIRA, NY
$575.4K
204 cit.
ELITE ROOFING SERVICES, INC.
GLEN COVE, NY
$522.5K
7 cit.
Other Inspected Facilities in ELMIRA, NY
MC WANE, INC. DBA KENNEDY VALVE
$575.4K
204 cit.
KENNEDY VALVE, A DIVISION OF MCWANE, INC
$232.1K
97 cit.
DOLLAR TREE STORES INC
$135.4K
3 cit.
ELMIRA PATTERN AND FOUNDRY CO., INC.
$76.0K
65 cit.
HARDINGE INC.
$30.6K
32 cit.
Related Guides & Tools
OSHA Fines & Penalties Guide →
How OSHA calculates penalties and maximum fine amounts.
After an OSHA Inspection →
Citations, appeals, and penalty negotiation steps.
Top 10 OSHA Violations →
The most frequently cited standards nationwide.
Manufacturing Safety Data →
Industry-wide violation stats and rankings.

Explore more: OSHA enforcement in ELMIRA · New York data · Search the database · Incident Rate Calculator

Frequently Asked Questions
What OSHA violations was ELMIRA STAMPING & MFG. CORP. cited for?

ELMIRA STAMPING & MFG. CORP. received 6 citation(s) covering 3 distinct OSHA standards. Total proposed penalties were $15,368.00. The inspection opened on 2025-01-07.

How much was ELMIRA STAMPING & MFG. CORP. fined by OSHA?

OSHA proposed penalties of $15,368.00 against ELMIRA STAMPING & MFG. CORP. in ELMIRA, NY. Average per citation: $2,561.33.

Is ELMIRA STAMPING & MFG. CORP. a safe workplace?

Based on enforcement records, ELMIRA STAMPING & MFG. CORP. has a risk score of 6 out of 100. DOL records document workplace safety violations warranting formal citation under the OSH Act. While classified at the standard enforcement level, all OSHA citations require corrective action and may indicate areas where workplace safety programs should be strengthened.

How does this penalty compare to the industry average?

The average penalty for Metal Crown, Closure, and Other Metal Stamping (except Automotive) facilities is $6,436.62. This facility penalty of $15,368.00 is above the industry average.