Tier 3 Elevated

ALUMINUM SHAPES, LLC.

📍 9000 RIVER ROAD, DELAIR, NJ 08110🏭 Alumina and Aluminum Production and Processing (NAICS 331316)📅 2018-01-16
$674,161.68
Total Penalties
176
Citations
50/100
Risk Score
431
Analysis Words
Enforcement Analysis

According to U.S. Department of Labor enforcement records, ALUMINUM SHAPES, LLC. — a alumina and aluminum production and processing facility located at 9000 RIVER ROAD, DELAIR, NJ 08110 — was the subject of a formal OSHA inspection that resulted in 176 citation(s) and cumulative proposed penalties of $674,161.68. The inspection case was opened on 2018-01-16.

Cumulative penalties significantly exceed the national median for OSHA enforcement actions. The penalty amount suggests multiple high-gravity citations, indicating conditions that presented a substantial probability of death or serious physical harm to employees.

BLS Injury Data: According to the Bureau of Labor Statistics (2022), this industry sector has an occupational injury rate of 3.3 per 100 full-time workers — 22% above the national average of 2.7. The sector fatality rate is 2.3 per 100,000 workers.

EPA Environmental Record: The EPA currently lists this facility under Significant Violation status. EPA penalties total $16,800.00 (Hazardous Waste (RCRA): $16,800.00). Toxic Release Inventory reports 113 lbs in releases/transfers. Source: EPA ECHO database.

Industry Benchmark: The total penalty of $674,161.68 is more than 104.7× the national average of $6,436.62 for facilities in the Manufacturing sector (NAICS 331316). This sector encompasses 82,943 inspected facilities nationwide with aggregate penalties totaling $533.9M.

State Context: Within NJ, this facility's penalty places it at the 100th percentile among 81,999 inspected facilities. The statewide average penalty is $3,616.41.

Citation Analysis: The inspection produced 176 citations spanning 9 distinct OSHA regulatory standards. The citation breakdown includes: 13 serious — A workplace hazard that could cause death or serious physical harm exists, and the employer knew or should have known about the condition. 2 other-than-serious — The violation has a direct relationship to job safety and health but is unlikely to cause death or serious physical harm.

Enforcement Timeline: Citations were issued beginning July 17, 2006 with the latest abatement deadline set for July 15, 2016. Of the 176 total citations, 9 (5%) have been marked as abated in DOL records, which may indicate ongoing compliance gaps requiring further regulatory attention.

Penalty Assessment: The cumulative penalty of $674,161.68 reflects OSHA's gravity-based penalty calculation methodology, which considers the severity of potential injury, the probability of occurrence, the employer's size, good faith, and violation history. The per-citation average of $3,830.46 falls within the standard penalty range.

The staggering volume of 176 citations and a penalty exceeding $674

Citation Matrix — 176 Citations
29 CFR 1910.179(n)(03)
Serious
Penalty: $3,000.00Gravity: 10Issued: July 17, 2006Abated: Pending
29 CFR 1910.179(n)(03)
Other-than-Serious
Penalty: $0.00Gravity: 10Issued: July 17, 2006Abated: Pending
29 CFR 1910.212(a)(01)
Machine Guarding — General Requirements
Serious
Penalty: $2,250.00Gravity: 10Issued: July 17, 2006Abated: ✓ Yes
29 CFR 1910.147(c)(04)
Control of Hazardous Energy (Lockout/Tagout)
Serious
Penalty: $2,295.00Gravity: 05Issued: March 29, 2012Abated: ✓ Yes
29 CFR 1910.179(g)(01)
Serious
Penalty: $2,295.00Gravity: 05Issued: March 29, 2012Abated: ✓ Yes
29 CFR 1910.184(c)(01)
Slings Safety
Serious
Penalty: $2,295.00Gravity: 05Issued: March 29, 2012Abated: ✓ Yes
29 CFR 1910.184(i)(01)
Slings Safety
Serious
Penalty: $0.00Gravity: 05Issued: March 29, 2012Abated: ✓ Yes
29 CFR 1910.184(i)(09)
Slings Safety
Serious
Penalty: $0.00Gravity: 05Issued: March 29, 2012Abated: ✓ Yes
29 CFR 1910.212(a)(03)
Machine Guarding — General Requirements
Serious
Penalty: $2,868.75Gravity: 05Issued: March 29, 2012Abated: ✓ Yes
29 CFR 1910.303(b)(01)
Electrical — General Requirements
Serious
Penalty: $1,721.25Gravity: 01Issued: March 29, 2012Abated: ✓ Yes
29 CFR 1910.179(k)(02)
Other-than-Serious
Penalty: $0.00Gravity: nanIssued: March 29, 2012Abated: ✓ Yes
29 CFR 1910.95(k)(01)
Serious
Penalty: $3,500.00Gravity: 5Issued: December 14, 2015Abated: Pending
29 CFR 1910.132(a)
Personal Protective Equipment — General
Serious
Penalty: $2,100.00Gravity: 1Issued: December 14, 2015Abated: Pending
29 CFR 1910.133(a)(01)
Eye & Face Protection
Serious
Penalty: $0.00Gravity: 1Issued: December 14, 2015Abated: Pending
29 CFR 1910.23(a)(05)
Guarding Floor & Wall Openings
Serious
Penalty: $3,500.00Gravity: 5Issued: September 22, 2015Abated: Pending
This report is compiled from publicly available U.S. Department of Labor enforcement data under the Freedom of Information Act. SVEP Navigator is an independent research and analysis platform and is not affiliated with, endorsed by, or connected to OSHA, the Department of Labor, or any federal agency. Information is provided for research, educational, and compliance planning purposes only and does not constitute legal advice. Penalty amounts shown are proposed penalties and may have been modified through contest proceedings or settlement.
Local Competitor Benchmark

Comparing penalized facilities in DELAIR, NJ (Broader Sector)

ALUMINUM SHAPES, LLC. (This Facility)
$674.2K
176 cit.
DELAIR LLC
$7.4K
19 cit.
DELAIR GROUP INC.
$2.4K
2 cit.
More NJ Enforcement Records
ADRIAN CONSTRUCTION GROUP LLC
FRANKLIN LAKES, NJ
$1.0M
10 cit.
ALJ HOME IMPROVEMENT INC
HO HO KUS, NJ
$687.5K
8 cit.
OMEGA PLASTICS CORPORATION
LYNDHURST, NJ
$650.8K
118 cit.
CJ TMI MANUFACTURING AMERICA, LLC
ROBBINSVILLE, NJ
$534.3K
52 cit.
BB FRAME LLC DBA FRAME Q LLC, AS SUCCESSOR TO FRAME Q LLC, AND JUAN QUEVEDO
CLIFFSIDE PARK, NJ
$520.9K
9 cit.
Other Inspected Facilities in DELAIR, NJ
ALUMINUM SHAPES, INC.
$35.3K
60 cit.
DELAIR LLC
$7.4K
19 cit.
MPC INDUSTRIES, INC.
$5.1K
10 cit.
GEORGIA PACIFIC CORP
$3.2K
5 cit.
ALUMINUM SMELTERS OF NJ
$2.8K
9 cit.
Related Guides & Tools
OSHA Fines & Penalties Guide →
How OSHA calculates penalties and maximum fine amounts.
After an OSHA Inspection →
Citations, appeals, and penalty negotiation steps.
Top 10 OSHA Violations →
The most frequently cited standards nationwide.
Manufacturing Safety Data →
Industry-wide violation stats and rankings.

Explore more: OSHA enforcement in DELAIR · New Jersey data · Search the database · Incident Rate Calculator

Frequently Asked Questions
What OSHA violations was ALUMINUM SHAPES, LLC. cited for?

ALUMINUM SHAPES, LLC. received 176 citation(s) covering 9 distinct OSHA standards. Total proposed penalties were $674,161.68. The inspection opened on 2018-01-16.

How much was ALUMINUM SHAPES, LLC. fined by OSHA?

OSHA proposed penalties of $674,161.68 against ALUMINUM SHAPES, LLC. in DELAIR, NJ. Average per citation: $3,830.46.

Is ALUMINUM SHAPES, LLC. a safe workplace?

Based on enforcement records, ALUMINUM SHAPES, LLC. has a risk score of 50 out of 100. Cumulative penalties significantly exceed the national median for OSHA enforcement actions. The penalty amount suggests multiple high-gravity citations, indicating conditions that presented a substantial probability of death or serious physical harm to employees.

How does this penalty compare to the industry average?

The average penalty for Alumina and Aluminum Production and Processing facilities is $6,436.62. This facility penalty of $674,161.68 is above the industry average.